월요일, 12월 23
Shadow

#043 Manipulating Characters in a String

Manipulating Characters in a String

The String class has a number of methods for examining the contents of strings, finding characters or substrings within a string, changing case, and other tasks.

Getting Characters and Substrings by Index

You can get the character at a particular index within a string by invoking the charAt()accessor method. The index of the first character is 0, while the index of the last character is length()-1. For example, the following code gets the character at index 9 in a string:

String anotherPalindrome = "Niagara. O roar again!"; 
char aChar = anotherPalindrome.charAt(9);

Indices begin at 0, so the character at index 9 is ‘O’, as illustrated in the following figure: 

Use the charAt method to get a character at a particular index.
If you want to get more than one consecutive character from a string, you can use thesubstring method. The substring method has two versions, as shown in the following table:

 

The substring Methods in the String Class
Method Description
String substring(int beginIndex, int endIndex) Returns a new string that is a substring of this string. The first integer argument specifies the index of the first character. The second integer argument is the index of the last character + 1.
String substring(int beginIndex) Returns a new string that is a substring of this string. The integer argument specifies the index of the first character. Here, the returned substring extends to the end of the original string.

The following code gets from the Niagara palindrome the substring that extends from index 11 up to, but not including, index 15, which is the word “roar”:

String anotherPalindrome = "Niagara. O roar again!"; 
String roar = anotherPalindrome.substring(11, 15);

 

Use the substring method to get part of a string.

Other Methods for Manipulating Strings

Here are several other String methods for manipulating strings: 

Other Methods in the String Class for Manipulating Strings
Method Description
String[] split(String regex)
String[] split(String regex, int limit)
Searches for a match as specified by the string argument (which contains a regular expression) and splits this string into an array of strings accordingly. The optional integer argument specifies the maximum size of the returned array. Regular expressions are covered in the lesson titled “Regular Expressions.”
CharSequence subSequence(int beginIndex, int endIndex) Returns a new character sequence constructed from beginIndex index up until endIndex – 1.
String trim() Returns a copy of this string with leading and trailing white space removed.
String toLowerCase()
String toUpperCase()
Returns a copy of this string converted to lowercase or uppercase. If no conversions are necessary, these methods return the original string.

Searching for Characters and Substrings in a String

Here are some other String methods for finding characters or substrings within a string. The String class provides accessor methods that return the position within the string of a specific character or substring: indexOf() and lastIndexOf(). The indexOf() methods search forward from the beginning of the string, and the lastIndexOf() methods search backward from the end of the string. If a character or substring is not found, indexOf() andlastIndexOf() return -1.The String class also provides a search method, contains, that returns true if the string contains a particular character sequence. Use this method when you only need to know that the string contains a character sequence, but the precise location isn’t important.

The following table describes the various string search methods.

 

The Search Methods in the String Class
Method Description
int indexOf(int ch)
int lastIndexOf(int ch)
Returns the index of the first (last) occurrence of the specified character.
int indexOf(int ch, int fromIndex)
int lastIndexOf(int ch, int fromIndex)
Returns the index of the first (last) occurrence of the specified character, searching forward (backward) from the specified index.
int indexOf(String str)
int lastIndexOf(String str)
Returns the index of the first (last) occurrence of the specified substring.
int indexOf(String str, int fromIndex)
int lastIndexOf(String str, int fromIndex)
Returns the index of the first (last) occurrence of the specified substring, searching forward (backward) from the specified index.
boolean contains(CharSequence s) Returns true if the string contains the specified character sequence.

Note: CharSequence is an interface that is implemented by the Stringclass. Therefore, you can use a string as an argument for the contains()method.


Replacing Characters and Substrings into a String

The String class has very few methods for inserting characters or substrings into a string. In general, they are not needed: You can create a new string by concatenation of substrings you have removed from a string with the substring that you want to insert.The String class does have four methods for replacing found characters or substrings, however. They are:

 

Methods in the String Class for Manipulating Strings
Method Description
String replace(char oldChar, char newChar) Returns a new string resulting from replacing all occurrences of oldChar in this string with newChar.
String replace(CharSequence target, CharSequence replacement) Replaces each substring of this string that matches the literal target sequence with the specified literal replacement sequence.
String replaceAll(String regex, String replacement) Replaces each substring of this string that matches the given regular expression with the given replacement.
String replaceFirst(String regex, String replacement) Replaces the first substring of this string that matches the given regular expression with the given replacement.

An Example

The following class, Filename, illustrates the use of lastIndexOf() and substring() to isolate different parts of a file name. 


Note: The methods in the following Filename class don’t do any error checking and assume that their argument contains a full directory path and a filename with an extension. If these methods were production code, they would verify that their arguments were properly constructed.


/*
 * Copyright (c) 1995 - 2008 Sun Microsystems, Inc.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   - Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   - Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *
 *   - Neither the name of Sun Microsystems nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */ 

/**
 * This class assumes that the string used to initialize
 * fullPath has a directory path, filename, and extension.
 * The methods won't work if it doesn't.
 */
public class Filename {
    private String fullPath;
    private char pathSeparator, extensionSeparator;

    public Filename(String str, char sep, char ext) {
        fullPath = str;
        pathSeparator = sep;
        extensionSeparator = ext;
    }

    public String extension() {
        int dot = fullPath.lastIndexOf(extensionSeparator);
        return fullPath.substring(dot + 1);
    }

    public String filename() {  // gets filename without extension
        int dot = fullPath.lastIndexOf(extensionSeparator);
        int sep = fullPath.lastIndexOf(pathSeparator);
        return fullPath.substring(sep + 1, dot);
    }

    public String path() {
        int sep = fullPath.lastIndexOf(pathSeparator);
        return fullPath.substring(0, sep);
    }
}

Here is a program, FilenameDemo, that constructs a Filename object and calls all of its methods:

/*
 * Copyright (c) 1995 - 2008 Sun Microsystems, Inc.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   - Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   - Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *
 *   - Neither the name of Sun Microsystems nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */ 

public class FilenameDemo {
    public static void main(String[] args) {
        final String FPATH = "/home/mem/index.html";
        Filename myHomePage = new Filename(FPATH,
                                           '/', '.');
        System.out.println("Extension = " + 
             myHomePage.extension());
        System.out.println("Filename = " + 
             myHomePage.filename());
        System.out.println("Path = " + 
             myHomePage.path());
    }
}

And here’s the output from the program:

Extension = html
Filename = index
Path = /home/mem

As shown in the following figure, our extension method uses lastIndexOf to locate the last occurrence of the period (.) in the file name. Then substring uses the return value oflastIndexOf to extract the file name extension — that is, the substring from the period to the end of the string. This code assumes that the file name has a period in it; if the file name does not have a period, lastIndexOf returns -1, and the substring method throws aStringIndexOutOfBoundsException

The use of lastIndexOf and substring in the extension method in the Filename class.
Also, notice that the extension method uses dot + 1 as the argument to substring. If the period character (.) is the last character of the string, dot + 1 is equal to the length of the string, which is one larger than the largest index into the string (because indices start at 0). This is a legal argument to substring because that method accepts an index equal to, but not greater than, the length of the string and interprets it to mean “the end of the string.”

답글 남기기

이메일 주소는 공개되지 않습니다. 필수 필드는 *로 표시됩니다

이 사이트는 스팸을 줄이는 아키스밋을 사용합니다. 댓글이 어떻게 처리되는지 알아보십시오.